Reloading data - Nosler Partition 130g spitzer.

[Kim Sawyer]

Some help please. Does any-one have any reloading data for the above
bullet, for the .270 Winchester? Nosler's site provides no information
at all.

Any help would be much appreciated.

[Dave]

Post by Kim Sawyer
Some help please. Does any-one have any reloading data for the above
bullet, for the .270 Winchester? Nosler's site provides no information
at all.
Any help would be much appreciated.
--
Kim Sawyer
Sutherland
Scotland

Hello Kim,

Have you tried "steves reloading pages"? There's a link to it on my website
under the "Cartridges and Reloading" page There's a lot of rifle loading
information on there

Regards
Dave (www.kwacs.org.uk)

[Kim Sawyer]

Post by Dave
Hello Kim,
Have you tried "steves reloading pages"? There's a link to it on my website
under the "Cartridges and Reloading" page There's a lot of rifle loading
information on there

Thanks, Dave. I found quite a bit of useful data and plenty of links to
investigate further. Congratulations. You host a very nice site.

[Dave]

Post by Kim Sawyer

Post by Dave
Hello Kim,
Have you tried "steves reloading pages"? There's a link to it on my website
under the "Cartridges and Reloading" page There's a lot of rifle loading
information on there

Thanks, Dave. I found quite a bit of useful data and plenty of links to
investigate further. Congratulations. You host a very nice site.
--
Kim Sawyer
Sutherland
Scotland

Thanks Kim for the kind comment

Regards
Dave

[ash]

what powder are you going to use with it and case size
a.. 270 WIN SHORT MAG
a.. 270 WTHBY MAG

Post by Kim Sawyer
Some help please. Does any-one have any reloading data for the above
bullet, for the .270 Winchester? Nosler's site provides no information
at all.
Any help would be much appreciated.
--
Kim Sawyer
Sutherland
Scotland

[Kim Sawyer]

Post by ash
what powder are you going to use with it and case size
a.. 270 WIN SHORT MAG
a.. 270 WTHBY MAG

Sorry for the late response; my ISP has had some problems lately. Thanks
for the offer of assistance but the problem has now been solved. I
picked up the data I required elsewhere and worked up two loads using
N160 and Reloader 19. Both proved to be more than acceptable for my
requirements